Table of Contents
Installing a widebody kit on your Dodge Ram can dramatically enhance its appearance and performance. Doing it yourself saves money and gives you a sense of achievement. Here’s a step-by-step guide to help you through the process.
Tools and Materials Needed
- Widebody kit specific to your Dodge Ram model
- Socket set and wrenches
- Screwdrivers
- Measuring tape
- Sandpaper or sanding block
- Automotive primer and paint
- Adhesive or mounting brackets (as recommended)
- Protective gloves and safety glasses
Preparation Steps
Begin by parking your Dodge Ram on a flat surface and engaging the parking brake. Remove the wheels to access the fender areas easily. Clean the surface thoroughly to remove dirt and grease. Measure and mark where the widebody kit will be installed to ensure proper fitment.
Installing the Widebody Kit
Follow these steps to install the kit:
- Test fit each piece of the kit to confirm fitment before permanent attachment.
- Use sandpaper to roughen the surface of the vehicle where the kit will be attached, improving adhesion.
- Apply automotive primer to the kit pieces if needed, then paint to match your vehicle’s color.
- Secure the kit using the provided adhesive or mounting brackets, following the manufacturer’s instructions.
- Ensure all parts are aligned correctly and tightened securely.
- Allow the adhesive to cure as specified before reinstalling the wheels.
Final Tips
Take your time during installation to ensure a clean, professional look. Double-check all attachments and paint finish. Once completed, reinstall the wheels, lower the vehicle, and do a test drive to check for any issues. Regularly inspect the kit for signs of wear or damage, especially after off-road use or harsh weather.
Safety Precautions
Always wear protective gloves and safety glasses when working with tools and chemicals. Work in a well-ventilated area, especially when painting or using adhesives. If unsure about any step, consult a professional or refer to the kit’s detailed instructions.