Table of Contents
Changing the oil in your Dodge Hellcat is a crucial maintenance task that ensures your engine runs smoothly and efficiently. This step-by-step guide will help you perform an oil change in your Hellcat with confidence.
What You’ll Need
- 5 quarts of high-quality synthetic oil
- New oil filter
- Oil catch pan
- Wrench set
- Oil filter wrench
- Funnel
- Shop towels
- Jack and jack stands
Preparation
Before starting the oil change, ensure your Hellcat is parked on a level surface. Allow the engine to cool down if it has been running. Gather all the tools and materials listed above.
Step 1: Lift the Vehicle
Using a jack, lift the front of your Dodge Hellcat and secure it with jack stands. This will provide you with easy access to the oil pan and filter.
Step 2: Drain the Old Oil
Place the oil catch pan under the oil pan. Locate the drain plug at the bottom of the oil pan and use the appropriate wrench to loosen it. Allow the old oil to completely drain into the catch pan.
Step 3: Replace the Oil Filter
Once the oil has drained, locate the oil filter. Use the oil filter wrench to remove the old filter. Before installing the new filter, apply a little new oil to the rubber gasket of the new filter to ensure a good seal.
Step 4: Install the New Oil Filter
Install the new oil filter by hand, turning it clockwise until it is snug. Do not overtighten it, as this can cause damage.
Step 5: Replace the Drain Plug
After replacing the oil filter, return to the oil drain plug. Reinstall the drain plug and tighten it securely with a wrench.
Step 6: Add New Oil
Using a funnel, pour the new synthetic oil into the engine through the oil fill cap. Check your owner’s manual for the correct oil capacity.
Step 7: Check Oil Level
After adding the oil, wait a few minutes for it to settle. Then, use the dipstick to check the oil level. If necessary, add more oil until it reaches the appropriate level.
Step 8: Start the Engine
Start your Dodge Hellcat and let it run for a few minutes. This allows the new oil to circulate through the engine and the new filter. Check for any leaks around the oil filter and drain plug.
Step 9: Dispose of Old Oil
Properly dispose of the old oil and oil filter. Many auto parts stores offer recycling services for used oil.
Conclusion
Changing the oil in your Dodge Hellcat is a straightforward process that can be done at home with the right tools and materials. Regular oil changes will help maintain your vehicle’s performance and longevity.