How to Replace Your Dodge Hellcat Engine Spark Plugs: Part Numbers and Procedure

by

Replacing the spark plugs in your Dodge Hellcat engine is an essential maintenance task that can enhance performance and fuel efficiency. In this guide, we will cover the part numbers you need and the step-by-step procedure for replacing the spark plugs.

Understanding Spark Plugs

Spark plugs are vital components of your engine, igniting the air-fuel mixture in the combustion chamber. A worn or faulty spark plug can lead to misfires, reduced power, and poor fuel economy.

Part Numbers for Dodge Hellcat Spark Plugs

  • OEM Spark Plug: 68243526AA
  • Aftermarket Option: NGK ILZKR7B11
  • Performance Upgrade: Autolite XP5703

Tools Required

  • Socket wrench set
  • Torque wrench
  • Extension bar
  • Gap gauge
  • Anti-seize compound

Step-by-Step Procedure

Step 1: Preparation

Before starting the replacement, ensure the engine is cool. Disconnect the negative battery terminal to prevent any electrical issues during the process.

Step 2: Remove Engine Covers

Remove any engine covers or components obstructing access to the spark plugs. This may include the intake manifold or plastic covers depending on your specific model.

Step 3: Remove Old Spark Plugs

Using the socket wrench and extension bar, carefully remove the old spark plugs. Turn counterclockwise until they are free. Be cautious not to drop debris into the cylinder head.

Step 4: Check Gap and Apply Anti-Seize

Before installing the new spark plugs, check the gap using a gap gauge. Adjust if necessary to meet specifications. Apply a small amount of anti-seize compound to the threads of the new spark plugs to ensure easier removal in the future.

Step 5: Install New Spark Plugs

Carefully thread the new spark plugs into the cylinder head by hand to avoid cross-threading. Once hand-tight, use the torque wrench to tighten them to the manufacturer’s specifications.

Step 6: Reassemble Engine Components

Reinstall any engine covers or components that were removed. Ensure all bolts are tightened to the correct torque specifications.

Step 7: Reconnect Battery and Test

Reconnect the negative battery terminal. Start the engine and listen for any irregular sounds. Check for smooth operation and monitor performance during the first few drives.

Conclusion

Replacing the spark plugs in your Dodge Hellcat is a straightforward process that can lead to improved engine performance. By following this guide, you can ensure that your vehicle runs smoothly and efficiently.